This dependable, powerful pneumatic production rock drill designed and proven in high production long-hole drilling in underground mining. For deep hole drilling undergound and surface quarries. Our machines proven in over 3,000,000 of drilling.
The PHQ36IR delivers fast penetration in hard rock drilling hole diameters from 38mm to 75mm diameter (1.5 inch to 3 inche) to depths of 50 meters (150 feet). Test Results Drilling Speed.
The drill is capable of drilling larger diameter holes to greater depths and has been used to drill holes up to 100mm diameter (4 inch) to depths of 90 meters (300 feet) Manufactured in Canada.
The PHQ36-IR drill is used in a wide range of applications mounted on drill jumbos in underground hard rock mines and track mounted units for surface quarry and construction drilling. PHQ36IR
ITEM | SPECIFICATION |
---|---|
Rotation at drill steel | Gear Type 40kW @120rpm at 500kPa |
Rotation Torque | 240 ft lbs @ 75 psi 320 NM @ 500kPa |
Cylinder Bore | 4.49 inches 114 mm |
Cylinder Stroke | 3.39 inches 86 mm |
Frequency | 27 Hz @ 500kPa |
Weight | 265 lbs 120 kg |
Specifications – PHQ36 Independent Rotation Drill
LARGER MATING FACES ON MAJOR COMPONENTS FOR LONGER LIFE ADAPTER BOLT ON END CAP AVAILABLE FOR FAST SHANK CHANGES ALL PARTS ARE INTERCHANGEABLE IN EXISTING S36-IR DRILL FLEETS MADE IN CANADA TO SPECIFICATIONS USING HIGH QUALITY TOOL STEEL FULL RANGE OF REPLACEMENT PARTS FOR PHQ36-IR DRILLS IN STOCK
ITEM | SPECIFICATION |
---|---|
Shank Size | 1¾ inch 4 splines 44 mm 4 splines |
Air Consumption | 450 cfm @ 100 psi 212 L/sec @ 7 bar |
Hole Depth Capacity Feed Mounted | 1.375 to 3.5 in to 150 feet 35 to 89 mm to 50 meters Ream to 5 inch (130mm) to full depth of pilot hole. |
Water Requirements | 10 gpm @ 70 psi 37 L/sec @ 5 bar |
Air and Water Connection Sizes | Percussion – 1 ½ inch BSP Rotation Motor – 1 inch BSP Water – ¾ inch BSP |
Air and Water Hose Sizes | Percussion – 1 ½ inch – 38mm Rotation Motor -1 inch – 25mm Water – ¾ inch – 20mm |
PHQ36 cylinders and intermediate housing are made from high density steel castings.
PHQ36 drill cylinders are machined to fine tolerances and heat treated to provide maximum performance. The components are tested in mine production drilling and proven reliable.
Parts HeadQuarters Inc., is now assembling complete PHQ36 Independent Rotation Drills in Burlington Ontario, ready to ship from stock.
Try one of our PHQ36-IR Drills to see the many innovations incorporated into this new Long-Hole Drill.
LARGER MATING FACES ON MAJOR COMPONENTS FOR LONGER LIFE ADAPTER BOLT ON END CAP AVAILABLE FOR FAST SHANK CHANGES ALL PARTS ARE INTERCHANGEABLE IN EXISTING S36-IR DRILL FLEETS MADE IN CANADA TO SPECIFICATIONS USING HIGH QUALITY TOOL STEEL FULL RANGE OF REPLACEMENT PARTS FOR PHQ36-IR DRILLS IN STOCK