logo1.gif (4780 bytes)Specifications  -  PHQ250JHSL Jackleg Drills

Jackleg Feed Leg Rotation Blows/Min Cylinder Bore Cylinder Stroke Chuck Size Feed Leg Weight Weight
w/Leg		 Leg Force Air Consumption
PHQ250JHSL  51"x 2.7"
1295mm x 68mm		 1 in 30 Upstroke 2300@90psi
2300@620kPa		 3.125"
 79.4mm		 2.625"
 67.7mm		 7/8" hex 4 1/4" 30 lb
 13.6 kg		 101 lb
 46.7kg		 536 ft/lb @90 psi 180 cfm @ 90 psi 5.1cu m/m@620kPa




Larger mating faces cylinder & front end (longer life)

Stainless steel pusher rod available* in leg (no corrosion)
Improved bucket arrangement in leg (longer life)
3" Stainless Legs available* (more push - less bounce)
Standard or Muffled drills  (noise reduction)

available* at nominal additional cost
Air Connection:         3/4 inch BSP
Water Connection:    1/2 inch BSP      
Force       78lb-ft at 90psi - 35.8kf at 620kPa 		Air Hose Size         1 inch - 25mm
Water Hose Size    3/4" - 12mm
Torque     210-250lbf-ft 90psi – 29-35kgf-m at 620kPa

 logo1.gif (4780 bytes)     PHQ250 Jackleg        Drill Parts      PHQ250 Drill Index       Quote - Test

Mail webmaster@partshq.com question or comment about the web site.    Last modified: July 05, 2010 Copyright © 1997 Parts HeadQuarters Inc. All rights reserved. Information in this document is subject to change without notice.  Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.