Photo Courtesy True North Mineral Laboratories Timmins ON

This JKS PackSack on the Feed Assembly was transported four kilometers into the bush in a trailer pulled behind an ATV four wheeler along with pump rods and bits.  The machine was set up as shown an 100 feet of casing drilled in overburden all in one day.  The drill is easily moved, set up and operated by one person.  Holes are drilled using light-weigh aluminum drill rods. 

• Capacity EW aluminum drill rods  150ft (25m) IEWS core 0.995 in (25.2 mm) diameter.
• Capacity AW aluminum drill rods  100ft (10m) IAWS core 1.385 in (35.1 mm) diameter.
• Torque 10ft lb (14Nm)
• Engine 6.5hp (4.8 kw) 4 cycle single cylinder air cooled gasoline engine with auxiliary fuel tank.
• Transmission 3 to 1 reduction with built-in water swivel
• Weight Drill and Feed Unit 34lb (15.8kg)
  
     Hand Held Mode     JKS4M Drill Brochure   JKS4M Feed Assembly