PH36-IR Long Hole Drill Mounted on PHQ-PLH2000 Carrier



CARRIER SHOWN WITH OPTIONAL TELESCOPING ARM FOR REMOTE CONTROL, HYDRAULIC ROTATION FOR FEED ON THE TRAVERSE AND HOSE PACKAGE		 The PLH Hydraulic Carrier Power Pack is driven by a 12.8 HP air motor, a simple gear pump, with 25 micron filtration in the 9 gallon reservoir.  A four wheel hydraulic planetary drive and braking system  can be released for towing.  The all welded frame is in two 24" modules easily disassembled for transportation.  Tires are solid 700-15-5.5 and the machine is leveled by four outrigger stabilizing jacks.

The traverse is hinged to allow the drill table to be dumped from +15° to -50° (H).  The PHQ36 Drill is moved laterally along the traverse by a feed screw.  Traverses are available in 48, 60, 72, 84 and 96" width

An optional telescopic arm positions the Drill Remote Control Panel within easy reach of the operator.

PHQ supplies a complete PHQ36-IR Long Hole Drill package mounted on the carrier for holes to 150 feet.

PHQ can supply a complete BBC120 Long Hole Drill package mounted on the carrier for holes to 100 feet.

  News Page   Application and Specifications    Inquire about Carrier     Recon Drill Carrier

Send mail to webmaster@partshq.com with questions or comments about this web site.       

Last modified: March 03, 2010

Copyright © 1997 Parts HeadQuarters Inc. All rights reserved. Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.